onsemi NXH0xxP120M3F1 SiC Modules contain 8mΩ/1200V, 10mΩ/1200V, 15mΩ/1200V, and 30mΩ/1200V M3S SiC MOSFETs based on half-bridge topology and a thermistor in a F1 package. These modules feature pre-applied Thermal Interface Material (TIM) and without pre-applied TIM. The NXH0xxP120M3F1 modules are designed with press-fit pins and are Pb-free, and Halide-free.

Amphenol FCI MEG-Array® Mezzanine Connector System provides the high density and high speed of a large array supported by the reliability and cost-effectiveness of a standard surface mount PCB assembly. MEG-Array optimizes high-speed signal integrity at speeds exceeding 10GB/s through flexible ground distribution.

TE Connectivity's (TE) ECP 600B High Voltage Contactors feature hermetically sealed contactors with ceramic technology and a dual coil design. The contactors allow a bi-directional load and are equipped with auxiliary contact. They also offer an enhanced insulation distance, fully allowing them to meet IEC60947-4-1 standards.

HARTING ix Industrial® IP20 PushPull Cables provide the miniaturization benefits of ix Industrial in a more efficient and comfortable design. The HARTING ix Industrial IP20 PushPull overmolded cable outlet offers improved bend protection and protection against higher tension on the cable.

NXP Semiconductors TJA11x-EVB-KIT Ethernet PHY Evaluation Kits use a common board design that consists of two parts. The TJA11xx-EVB (baseboard) and the TJA11xx-SDBx (SABRE card). The TJA11xx-EVB is compatible with TJA1104 and TJA1120 PHY transceivers, while the TJA11xx-SDBx is specific to the Ethernet PHY.

Banner Engineering S4B Safety Light Curtains are two-piece optoelectronic safeguarding devices that come in a compact package for smaller production machines. These light curtains create a screen of synchronized, modulated infrared sensing beams that extend from end to end of the sensors, ensuring there is no "dead zone."

Cole Hersee 75930 and 75940 DPST Battery Master Disconnect Switches safely cut off battery power to all electrical systems in heavy-duty vehicles and equipment used in mining, construction, agriculture, and transportation. These switches have a patented weld breaker safety feature and an integrated lockout/tagout, ensuring they achieve excellent safety standards.

TDK-Lambda HWS3000G Programmable CVCC AC-DC Power Supplies offer a 3000W maximum power rating in a compact design measuring 270mm x 150mm x 61mm. These power supplies feature serial or analog programming (CV/CC), offer nominal output voltages of 24V, 48V, 60V, and 130V, and the output current is fully programmable.