The NEW CP Series of Push-In DIN Rail Terminal Blocks    

• High Quality and cost competitive
• No tool required for easy connection
• Direct connection of solid wires and flexible wires with ferrules
• Thinnest 3.5 mm wide terminal block in the industry
• Stainless steel push-in spring
• Easy pushbutton release with any tool
• Universal Push-in jumper
• Different block types for many design options

Learn More >>

The New Altech ‘GEOS Cabinet’ Enclosure for Harsh Environments

• Hinged Door can be opened and closed quickly and easily
• Good operability of components
• No restrictions for the assembly of internal fittings
• Doors with wide opening angle > 180°
• Access to the interior space with standard locking system (3 mm - two-bit key)
• Alternative locking inserts available as accessories
• Doors are guided by frames to be solid
• Doors easily removed or reversed
• Frame accepts accessories (front plates, internal swing doors, contact protection modules, door stops, wiring)

Learn More >>

All In One DC-UPS for Battery Applications

• One unit provides Power Supply, Battery Charger, Battery Care Module, Backup Module
• Input: 110-230-277V AC
• Output: 12V up to 35A; 24V up to 20A; 48V up to 10A; other configurations on request

Learn More >>

Altech UL Circuit Protection

• UL 489 Miniature Molded Case Circuit Breakers
• UL508 Listed Manual Motor Controllers with Disconnecting Mean
• UL1077 Recognized Supplementary Protectors
• 1, 2 and 3 poles (4 poles upon request)
• Many trip curves available
• 10kA Short Circuit Withstand Capacity
• On/OFF indicator window
• AC or DC UL489

Learn More >>

UL98 - 60A & 100A Open & Enclosed Disconnect Switches

• One design used in direct and extended handle applications
• Horsepower rated, up to 75hp
• Enclosed switches are available in plastic, sheet metal and stainless steel enclosures
• Lockable in OFF position
• Silver contacts ensure safe and durable operation
• Many accessories available

Learn More >>

Plastic, Brass and Stainless Steel Liquid Tight Strain Reliefs

Altech's full line Liquid Tight Strain Reliefs, also called cable glands or cord grips, are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Standard Straight-Through “Suitable for most applications”, these are our most common parts.
• Industrial Straight-Through
• Industrial Flat Cable
• Industrial Multi-Conductor
• ATEX
• EMI/RFI
• Pull/Bend Protection
• Once according to DIN
• Locknuts
• Reducers, Enlargers and Thread Adapters
• Hole Plugs
• Seal Rings
• Corrugated Tubes & Tube Connectors

Learn More >>

Altech UL Ground Fault Protection

• UL489 Branch Circuit Breaker with Ground Fault Relay (only 1 in the industry)
• 1 Pole + N, 2 Pole and 2 Pole + N versions
• 240V AC and 120/240V AC
• Rated Current 5 - 40A
• Residual Current Sensitivity 10, 30, 100 and 300mA
• Rated Short Circuit Interrupt Capacity 10kA
• Rated Frequency 50/60Hz
• Overload Trip Curves B, C and D

Learn More >>

PC Series Contactors & Overload Relays

• Minimum size & Maximum performance
• Ambient temperatures – 40°C up to + 90°C
• Designed for the operation under extreme conditions (heat, dust, sand, high humidity, vibrations, shock)
• Bounce free, self cleaning aux. contacts, suitable for switching electronic circuits => highest contact reliability
• Current ratings from 10A to 115A
• Coil Voltages: 24 VAC ,24 VDC, 110-120 VAC, 110 VDC, 200-240 VAC
• Adjustable Overload Relays from 0.18A to 85A

Learn More >>

C Series Contactors & Overload Relays

• Compact Modular Design offering flexibility and space savings
• Low Power Consumption Coils provide energy savings and allow down sizing
• Finger Safe IEC rated IP20 terminals
• Built in Auxiliary Contact one NO standard
• Easy to Install featuring DIN Rail or bolt on mounting
• Current ratings from 9A to 800A
• Coil Voltages: 24 VAC ,24 VDC, 120 VAC, 208 VAC, 230 VAC, 240 VAC, 480 VAC
• Protective Security Cover prevents accidental manual operation

Learn More >>

The NEW CY Series of Screw Clamp DIN Rail Terminal Blocks

• High Quality and cost competitive
• Organized wiring of large number of wires
• CP8L32: 8-Level Marshalling Terminal Block with 4 Connections each
• CP8L32(I.S): Potential Distribution Terminal Block with 32 connections
• Push-In connection Technology for efficient wiring
• Maximum Signal Density
• Test point on each terminal
• Marking options to organize wiring
• Over 1000 connections per foot
• 24-14AWG

Learn More >>