Courtesy of sciencemag.org
Research staff and union representatives gathered at the science ministry building in Buenos Aires to address CONICET39s denial of fullsalary positions to its workers due to decreased government spending for scientific research in Argentina

Argentina's Scientists Fear Brain Drain after Budget Cuts

Jan. 4, 2017
As Argentina falls deeper into its recession, scientists warn the government that dipping into its science fund will only cause more problems.

Last week, more than 1,000 Argentine research scientists rallied outside the science ministry building in Buenos Aires to protest federal budget cuts that will force research institutions like the National Scientific and Technical Research Council (CONICET) to cut spending. The protest specifically combated CONICET's actions to deny full-salary jobs to entry-level scientists and researchers in 2017, expressing concerns that these groups would be forced to leave the country in search of better funding and job security in science-related fields.  More than 200 scientists also participated in occupying the science ministry building overnight. 

Despite his vow in 2015 to double the science fund from 0.7% to 1.5% of the national budget, Argentina's President Mauricio Macri responded to recent economic downturns and heightened national debt this September by proposing a cut in funding to the science ministry by 50%. The cut was met with protests and petitions from scientist-led organizations including the Science and Technology Argentina (CyTA).  It was consequently revised in November, but still reduced spending to the ministry by 36%, leaving no money for research institutions like CONICET to support salaried workers if they continue to provide stipends to PhD and post-doctoral students. 

CONICET currently employs 10,000 full-salaried researcher staff members. In 2013, it released a national innovative plan to increase its staff by 10% every year until 2019. This past year, CONICET received approximately 1,500 applications for research positions, and awarded 874 positive evaluations that would usually result in salaried positions. But since the budget cut only leaves room for a 6% pay rise, CONICET had to announce that it could only afford to hire about half of these workers. 

Although it ended in a compromise, the protest is one of the most impactful ones since the revised budget cut in November. Rather than promising any full-salaried positions to applicants, CONICET reassigned funding using its existing budget to extend 400 temporary fellowships to the end of 2017, rather than terminating them at the beginning of the New Year. It also created about 100 new fellowships, although no new permanent positions were created.

While the outcome was seen as a victory for the protest, the results still only put a Band-Aid on a bigger problem. Organizations like CyTA will continue to create petitions and organize protests to persuade the Argentine government to extend the national science budget to ensure job security and funding for researchers so they can use their scientific talents to benefit their own country. 

About the Author

Leah Scully | Associate Content Producer

Leah Scully is a graduate of The College of New Jersey. She has a BS degree in Biomedical Engineering with a mechanical specialization.  Leah is responsible for Machine Design’s news items that cover industry trends, research, and applied science and engineering, along with product galleries. Visit her on Facebook, or view her profile on LinkedIn

Sponsored Recommendations

50 Years Old and Still Plenty of Drive

Dec. 12, 2024
After 50 years of service in a paper plant, an SEW-EURODRIVE K160 gear unit was checked. Some parts needed attention, but the gears remained pristine.

Explore the power of decentralized conveying

Dec. 12, 2024
Discover the flexible, efficient MOVI-C® Modular Automation System by SEW-EURODRIVE—engineered for quick startup and seamless operation in automation.

Goodbye Complexity, Hello MOVI-C

Dec. 12, 2024
MOVI-C® modular automation system – your one-stop-shop for every automation task. Simple, future-proof, with consulting and service worldwide.

Sawmill Automation: Going Where Direct-Stop and Hydraulic Technologies “Cant”

Aug. 29, 2024
Exploring the productivity and efficiency gains of outfitting a sawmill’s resaw line with VFDs, Ethernet and other automated electromechanical systems.

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!