Why engineers often aren't good managers

Aug. 14, 2012
I often follow the postings of Bob Lewis, who runs a consulting firm called IT Catalysts, Inc. This week his missive hits particularly close to home for engineers-turned-managers. Successful engineers, he argues, tend to be successful because they are ...

I often follow the postings of Bob Lewis, who runs a consulting firm called IT Catalysts, Inc. This week his missive hits particularly close to home for engineers-turned-managers. Successful engineers, he argues, tend to be successful because they are good at figuring things out for themselves and putting in whatever time is necessary to get a job done. Managers, on the other hand, have to be good at delegating and organizing, which are totally different skills.

As Lewis relates, "The good ones understand that while they remain accountable for the results, they're supposed to give both responsibility and authority to the employee to whom they've assigned whatever task or goal it is that they've delegated. Too many engineers-turned-managers understand this only in their pre-frontal cortexes (cortices?), not their intestines -- in theory, that is, but not when the rubber of that's-how-I'm-supposed-to-delegate meets the road of maybe-the-assignee-won't-get-it-done-right. Worse, engineers being what they (we) are, 'right' generally means 'how I would have done it.' "

Unfortunately, I see a bit of myself in Lewis' observations. I suspect it is the same for a lot of engineers out there.

You can read Lewis' entire post here: http://www.issurvivor.com/

About the Author

Lee Teschler | Editor

Leland was Editor-in-Chief of Machine Design. He has 34 years of Service and holds a B.S. Engineering from the University of Michigan, a B.S. Electrical Engineering from the University of Michigan;, and a MBA from Cleveland State University. Prior to joining Penton, Lee worked as a Communications design engineer for the U.S. Government.

Sponsored Recommendations

50 Years Old and Still Plenty of Drive

Dec. 12, 2024
After 50 years of service in a paper plant, an SEW-EURODRIVE K160 gear unit was checked. Some parts needed attention, but the gears remained pristine.

Explore the power of decentralized conveying

Dec. 12, 2024
Discover the flexible, efficient MOVI-C® Modular Automation System by SEW-EURODRIVE—engineered for quick startup and seamless operation in automation.

Goodbye Complexity, Hello MOVI-C

Dec. 12, 2024
MOVI-C® modular automation system – your one-stop-shop for every automation task. Simple, future-proof, with consulting and service worldwide.

Sawmill Automation: Going Where Direct-Stop and Hydraulic Technologies “Cant”

Aug. 29, 2024
Exploring the productivity and efficiency gains of outfitting a sawmill’s resaw line with VFDs, Ethernet and other automated electromechanical systems.

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!