Tuesday, March 18, 2014 - 15:15

Fill in all the blanks (name, job title, etc.) and hit SUBMIT.

Tuesday, March 18, 2014 - 15:09

Fill in all the blanks (name, job title, etc.) and hit SUBMIT.

Tuesday, March 18, 2014 - 15:03

Those fluids/aerospace engineers consider air and water to be fluids so it hardly matters. I think one commonly used term is hydrofoil.

Tuesday, March 11, 2014 - 13:32

Thanks, but we're looking for movies that appeal to engineers, so they should probably have engineers as major characters, concern events and situations engineer are familiar with, and/or deal...

Friday, March 7, 2014 - 12:26

Do you have any reasons for nominating The World's Fastest Indian?

Wednesday, March 5, 2014 - 15:28

Nick:

Why is Apollo 13 such a great engineering movie. (Just looking for solid reasons/opinions)

Tuesday, December 10, 2013 - 12:03

Matter of fact,I can. Check out the article's companion pieces

100 yr of flight - Keep them Flying: Navigation
...

Monday, November 25, 2013 - 13:11

Yes, but it keeps a lot of Italians employed, both those assembling the car and the many more designing and building all the components that go into it. It also pushes science and technology along...

Monday, October 21, 2013 - 13:10

You're better off contacting igus yourself. Check their website for contact info.

Wednesday, September 4, 2013 - 12:51

I read of an interesting solution to the tuition/college loan problem: Make colleges co-sign the students' loans. It would give college administrators an incentive to make sure students graduated...

Wednesday, September 4, 2013 - 12:47

As an ex-military type, I couldn't let this one pass. Military academies will not pay students/cadets/midshipmen regardless of failure. Fail enough courses, and it probably isn' that many, and you...

Friday, August 23, 2013 - 13:23

The Segway was unveiled in 2001. Jimi Heselden bought the company that makes it in 2009 then died in 2010. If the Segway was going to take off and change the face of transportation, it would've...

Thursday, July 18, 2013 - 14:58

I think there's always a disconect between what a person says on a survey and what they truly believe.

Wednesday, July 17, 2013 - 07:49

The best way to get an internal drawing of this, as well as more info, is to talk to the company. Their address and contact info is in the article.

Friday, June 28, 2013 - 10:52

Though I'm likely not the first person to plug this one - the Edison National Historical Park in East Orange New Jersey is certainly a 'core' museum for engineers, inventors, and entrepreneurs....

Friday, June 28, 2013 - 09:16

I recommend:
• B&O Railroad Museum in Baltimore, MD
• Bradbury Science Museum, Los Alamos, NM (history of the Manhattan Project in WWII)
• Air Force...

Friday, June 28, 2013 - 08:20

I enjoyed your article about Museums for Engineers. Years ago, while installing some thread grinding equipment at the L. S. Starrett company, I had the opportunity to tour not only the...

Friday, June 28, 2013 - 08:20

How can you mention engineering, museums and aircraft in the same article without including
The National Air & Space Museum, or the Udvar-Hazy Center at Dulles Airport ( display floor...

Friday, June 28, 2013 - 08:19

Its been years since I went, but Kansas City has the largest WWI memorial museum in the country, or the world (it was one of the two when I went). The museum is set up like a timeline, with...

Friday, June 28, 2013 - 08:18

Good project to list museums of interest to engineers. The American Precision Museum in Windsor VT is close to where we are living now in NH, and is wonderful. They often have high school...

Friday, June 28, 2013 - 08:17

I'd suggest the Mütter Museum (19 S 22nd St Philadelphia, PA). Though it's primarily a museum of medical history, invention is very much a part of that history. One display that comes to mind is...

Friday, June 21, 2013 - 08:12

It's new website and we're working through the glitches.

Monday, June 10, 2013 - 13:50

We are a magazine, not Allied Devices. We do not sell screws. Please call or contact Allied.

Featured Article
3D Printing Essentials and Trends Part 1 By Jeff Kerns Read Now
The Difference Between...
Bearings By Carlos Gonzalez Bearings Read Now

Sponsored Introduction Continue on to (or wait seconds) ×