Skip to Content

Controls

Modular solenoid-valve connectors - Canfield Connector

The Series 5000 solenoid-valve connectors are protective enclosures for electrical connection in conjunction with hydraulic and pneumatic solenoid valves.

High-performance proportional valve and controller system - Enfield Technologies

 The Enfinity System combines an M2 pneumatic-control valve and a C2 controller, both available with an integrated driver.

Modular solenoid-valve connectors - Canfield Connector

The Series 5000 solenoid-valve connectors are protective enclosures for electrical connection in conjunction with hydraulic and pneumatic solenoid valves.

Proportional pneumatic cylinder controller with compliance.
Proportional Control of Pneumatic Cylinders
2

George Haithwaite and Jose Riofrio from Enfield Technologies demo several applications for pneumatic cylinders with proportional position control. 5:52

New Products: Flow Tubes

Custom flow tubes are made and tested to customer specifications

Norgren waterfall display

Richard Lewis from Norgren demonstrates a special fountain that uses Norgren valves

Electrohydraulic Controls Boost Thermal Drilling

The degree of work hardening depends on the material, but it’s rarely a problem in most steel alloys. As a result, the formed bushing is remarkably strong and can be used for bearing sleeves or, when threaded in a separate process, provides high torque capacity and pull-out strength.

Electronic Controls for Mobile Hydraulics

Standard hardware and software are critical for efficient and economical systems.

Scanning for Ideas: Proportional-Valve Controller in a small Package

MVP proportional-valve controllers from White Oak Controls, West Burlington, IA (whiteoakcontrols.com), store settings in permanent memory inside their sealed 18 DIN connector bodies.

Servocontrol with pneumatic actuators

Any aviation buff is well aware of the Wright Brothers’ role in the history of flight.

Compact Motor Controller

The RS40B Scara robots have load capacities ranging from 2 to 5 kg and reach of 400 mm.

Temperature Control System Reduces Variability in Fluid Dispensing

The ProcessMate 6500 Temperature Control System from EFD, Inc. eliminates temperature fluctuations in assembly fluids that can cause variations in shot size, viscosity and pot life.

Simulating Hydraulics, Pneumatics, Electrical

Automation Studio lets users design, document, simulate, and animate automation circuits including pneumatics, hydraulics, PLCs, sequential function charts, electrical controls, and more.

Modular controls for electronics and pneumatics on robots

The tooling on robotic arms , including electric actuators, sensors, pneumatic grippers, and suction cups, are often changed, depending on the job at hand.

Circuit board connects electronics and pneumatics

The E-Board from Pneumadyne Inc., Plymouth, Minn., lets designers connect 6, 12, or 24-Vdc controller signals to actuate up to 16 solenoid valves.

12>»