Switches

The 12.5-mm-wide KC Series signal conditioners feature low-power consumption, which reduces heat output.

Nanotechnology could lead to an on-off switch for nanoelectronics

MP3000 Switch Series, with a floater actuator, accurately determines when specified liquid levels are reached

The FSW-410 Series flow and temperature switches are designed for industrial cooling systems. The maintenance- free, IP67-protected units feature a normally open fail-safe, have no moving parts, and no adjustment or calibration is required.

RP8100 round illuminated pushbutton switch comes with either a threaded or snap-in panel mount. Switch specifications include 500,000 cycles at full load electrical life

The chemically resistant ball has a 2-in. diameter and a 210°F working temperature and can withstand 250°F for a short period. While the MP300 switches mount outside the liquid contents, they have a sealed, IP67 design.

Specifically designed for the pumping industry, the relay’s design makes it suitable for any application requiring switching capabilities to control multiple loads.

The high-resolution LCDCD SmartSwitch and SmartDisplay programmable switches simplify user interaction with machines via a changeable graphical interface.

The switches come in tape and reel packaging and are subminiature surface mount.  The switches consist of EG1300, EG180, and EG1381 – three-position subminiature; EG1390 – two-position subminiature; and EG1400 – DP3T subminiature.

LP6 Series illuminated pushbutton switch come as SPST or DPST.

The MP3000 Switch Series, with a floater actuator, accurately determines when specified liquid levels are reached.

The FSW-410 Series flow and temperature switches are designed for industrial cooling systems.

The RP8100 round illuminated pushbutton switch comes with either a threaded or snap-in panel mount.