The ACS stepper drive/controller with Ethernet supports both Ethernet/IP and Modbus TCP for easy connectivity to Allen-Bradley PLCs and other PLCs and HMIs. The unit commands motion with immediate move command or preconfigured moves for infinite position capability. Each move has configurable parameters —position, velocity, acceleration/ deceleration, and force — that are independent for each move. The Ethernet connectivity provides additional status and diagnostic information to the control system for better monitoring and fault recovery.

Tolomatic
3800 County Road 116
Hamel, MN 55340
(800) 328-2174
www.tolomatic.com

© 2012 Penton Media, Inc.