Handle with care Thermoplastic holds superflammable flares
Armtec Defense Products Co., Coachella, Calif., makes the flares from a mixture of magnesium and other chemicals that is extruded and then pelletized. The magnesium mixture burns intensely and is extremely hazardous if mishandled, says Linda Swope, Armtec director of flare programs. Static electricity can ignite the pellets as they are hand-loaded into the flares metal canister.
To keep technicians safe, Armtec, a subsidiary of Esterline Technologies Corp., Bellevue, Wa., uses antistatic Kydex GND alloy sheets that have a surface resistivity of 105 Ω/sq and meet UL Standard 94 V-0 flame requirements. The thermoplastic from Kleerdex Co., Bloomsburg, Pa., remains conductive after being thermoformed into deep-drawn containers and lids by Formed Plastics Inc., Carle Place, N.Y. The Armtec parts range from 25-in.-diameter, 2.75 in.-high flare-composition-storage and 29-in.-diameter, 6-in.-high mixing-vat lids to 18-in.-diameter, 24-in.-high blend-pot and 14-in.-diameter, 17-in.-high slurry-pot covers.
Kydex GND sheets are thermoformed on a single-station model 84SP pressure-forming machine from Maac Machinery, Carol Stream Ill., using a special snap-back vacuum-forming technique. After thermoforming they are rigid (flexural modulus of 270 kpsi), resist most chemicals, and have uniform wall thicknesses and high detail, says Formed Plastics president Pat Long. The sheets mount on a clamping frame and transfer into a heating station where ceramic heaters uniformly warm sheet tops and bottoms.
The snap-back technique assures even distribution of material thickness, Long says. Each lid requires a different sized sheet. For example, the mixing-vat-container lid blank is 36-in. square and 0.312-in. thick while the blend-pot cover blank is 42-in. square and 0.375-in. thick. The flare composition-storage and slurry-pot blanks are from 0.25-in.-thick sheets that are 34 34 in. and 30 30 in., respectively.