Most Viewed

An air compressor that raises the air-suspension seats in off-highway vehicles uses injection-molded plastic parts instead of those made with die-cast aluminum.

Eaton Corp. has introduced the world's first 5,000-psi hydraulic pump for commercial aircraft on the Airbus A380, the world's largest passenger plane.

The High Pressure 156 Lee Chek valve from The Lee Co., Westbrook, Conn. (theleeco.com), weighs only 0.7 gm with a diameter of 0.156 in., but is said to be 2.5 times as efficient as high-pressure check valves of similar size.

The 303 stainless steel IMH Orifice is an accurate miniature flow restrictor that is flow tested to ensure that every part is within ±5% of its nominal flow rate

Automation Studio lets users design, document, simulate, and animate automation circuits including pneumatics, hydraulics, PLCs, sequential function charts, electrical controls, and more.

The right chemistry minimizes operating problems and saves money.

The E-Board from Pneumadyne Inc., Plymouth, Minn., lets designers connect 6, 12, or 24-Vdc controller signals to actuate up to 16 solenoid valves.

Pneumatic cylinders put their interior hardware through quite a stress test. To lessen the effects those stresses have on shortening the cylinder's operational life and causing maintenance problems, engineers at Ace Controls Inc. developed NuCushions.

The picture on the above shows manual clamps on a welding fixture.

A new catalog on Ambush squeeze
bushings includes sizing guidelines and
a selection chart.

Utility software supplied with each module supports multiple operating systems including Windows 2000 and XP, WinCE 6.0, and Linux Kernel 2.6, eliminating manual programming of the modules. Both modules include TX/RX LED indicators, as well as shared IRQ settings for each of their ports.

The extreme chemical and wear resistance of ruby and sapphire orifices ensure dependable control of the harshest liquids and 467gases.

Two new models of ac-ac LVDTs have been developed to work in extreme pressures and temperatures. To handle high pressures, the transducer housing is perforated to equalize pressure inside and outside.

Valve terminals keep pace with the latest control systems and communications networks.

25th Anniversary Catalog 22 covers common industrial problems.