More articles by Staff

It weighs 1.2 kg, including its 3-m power cord and air-supply hose. The unit requires at least 40 lpm of airflow from an optional remote blower system or compressed-air supply.

The product lets installers attach components in off-center applications and compensate for tolerance stack up in the manufacturing process. Riv-Float can replace cage nuts, clinch nuts, floating nut plates, or weld nuts.

Designed to fill a wide range of hole sizes and offering a broad grip range from 0.12 to 0.87 in., the Huck- Lok creates rugged joints suited for a wide range of structural assemblies. The HuckLok is available in 0.18 through 0.25-in. diameters.

The GH100 hose is qualified for underhood use with biodiesel B2 to B20 up to 150°C, biodiesel B100 up to 125°C, and for transmission-oil cooler applications using synthetic lubricants at peak temperatures up to 175°C.

Series 2FSI flat-face couplings contain special sectors made of hardened steel rather than latching balls to increase the contact surface between male and female couplings, preventing the brinelling effect.

A one-piece captive flange for Code 61 and Code 62 connections is designed to attach to a hose after the hose’s fitting has been crimped.

Scapa 815 is a flash-breaker tape designed to mask and hold tools, forms, and parts for metal or composite bonding.

The Videojet DataFlex Plus thermal-transfer overprinter for flexible packaging prints up to 40 ips (1,000 mm), or 425 packages/ min, depending on ribbon width and application.

The Intermediate Drive Conveyor in the Designer System conveyor line requires only a 26-in. straight section and lets users determine gearmotor placement.

The 596S Continuum Shrink Wrapper's single-roll lap seal handles PET, glass, and metal containers.