Sensors and Transducers: Pressure Sensors

February 2, 2009

New brass sensors are compatible with various liquid and gaseous media. Models P4055/P4056 OEM pressure sensors have a piezoresistive sense element and the P4050 is available in pressure ranges of 0 to 3 through 0 to 300-psi gage, sealed gage, and absolute. The P4056 comes in measurement ranges of 0 to 200 mBar through 20 Bar. The P4055/P4056 have a built-in Metri-Pack 150 electrical connector. The sensors operate on 5 Vdc and provide a 0.5 to 4.5-Vdc output proportional to pressure. Pressure port options include NPT, G 1/4, M10, and M12. The temperature-compensated sensors have good EMI/RFI performance and tolerate high-vibration environments. Total error band is ±2% over –20 to 85°C with a full operating temperature range of –40 to 125°C.

Kavlico
14501 Princeton Ave.
Moorpark, CA 93021
(805) 523- 2000
kavlico.com

Comments

New development

On February 12th, 2009 Satish Pathak (not verified) says:

I hold patent for a precise liquid dispensing valve. At present I use feedback of an electronic weighing scale. The valve is suitable for gravity flow and the reservoir can be of any size from 100 grams to 5000 Kilograms. If I am able to use this sensor near the valve or amend the design of valve to accommodate the sensor for knowing the header pressure it will help me. Hence, i request you to send more details.

Thanks & Best Regards,

Satish Pathak
+919867209667