My Site
Skip to Content

PCB Edge Connector

August 9, 2007

Printer-friendly version

The CUF Series of female connectors attach directly to comb-edge male connectors built on circuit boards. The CE, UL, and VDEapproved connectors come in side stackable and polarized versions in pole pitches of 5 and 10 mm and take wire sizes from 12-to-30 awg. Both types are rated for 300 V (UL) and 750 V (Vde) at 10 A. Side-stackable connectors come in 2 to 16 poles. Polarized versions have 5 to 16 poles at 5-mm spacing and 2 to 8 poles with 10-mm spacing.

BlockMaster, 1400 Howard St., Elk Grove, IL 60007, (800) 595-8881, blockmaster.com

Want to use this article? Click here for options!
© 2012 Penton Media Inc.

Comments

PCB edge connector

On February 12th, 2010 Chris Roff (not verified) says:

I am searching for a couple of connectors that will be used in a programming test fixture: Fixture that requires an interface with the PCB edge connector specs (Samtec P/N: mec8-1xx-xx-xx-d-rxx-xx): of the pcb edge connector and 0.8mm [.031”] right angle edge card assembly. What I’m looking for is a vertical (through hole or wire wrap) female connector (similar to a PCI slot connector). Through hole or wire wrap SD Memory Card Connector (Push-Push Type Standoff 0mm). Refer to card socket spec (ZM90-04011-09x4-(A)) for surface mount component. Please let me know if you have components mentioned above available? Regards, Chris Roff Ph#(516)577-5817

Leave a comment

The content of this field is kept private and will not be shown publicly.

Acceptable Use Policy