Linear Stepping Actuator

    Sept. 15, 2005
    This Size-17 linear step actuator is a two-phase hybrid stepmotor combined with a leadscrew.

    Maximum load capacity of the DSM4234LN linear actuator is 150 N (33.8 lb force) with a step size of 3.5 m (0.00138 in.) The front bearing is supported by a threaded nut adjustment for minimizing backlash. The leadscrew nut uses an extended length threaded shaft with a metric M4 thread at 0.7-mm (0.0276-in.) pitch.

    Gee Plus Inc., 2400 Cedar Springs Rd., Elgin, SC 29045, (803) 406-3009, geeplus.biz

    Continue Reading

    Sponsored Recommendations

    June 27, 2025
    Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.
    June 27, 2025
    Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.
    June 25, 2025
    An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...
    June 25, 2025
    Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Machine Design, create an account today!