High-Flow Conductive Compounds

May 19, 2005
Easy-to-mold conductive polypropylene (PP) compounds have typical melt flows of 20 gm/ 10 min (2,160 gm at 230°C).

Easy-to-mold conductive polypropylene (PP) compounds have typical melt flows of 20 gm/ 10 min (2,160 gm at 230°C). Maximum surface resistivity is 104 w-cm and volume resistivity is < 25 w. The PPs also resist warping, and have a notched IZOD impact strength of 2.5 ft-lb/in. (133 J/m), and a "no break" unnotched IZOD impact strength. Applications include containers, totes, bins, pipette tips, and explosive handling products for medical, electronic, and biotechnical.

RTP Co.
Box 5439, 580 E. Front St.
Winona, MN 55987
(507) 454-2041
rtpcompany.com

Sponsored Recommendations

June 27, 2025
Ensure workplace safety and compliance with our comprehensive Lockout/Tagout (LOTO) Safety Training course. Learn critical procedures to prevent serious injuries.
June 27, 2025
Join our expert webinar to discover essential safety control measures and best practices for engineering a truly safe and compliant industrial environment.
June 25, 2025
An innovative aircraft with electric drives combines the best of both worlds. The cross between drone and helicopter could mean significantly faster and more efficient air emergency...
June 25, 2025
Effective when other materials fail, ceramics are particularly suitable for applications requiring wear and chemical resistance, sliding characteristics or biocompatibility. Discover...

Voice your opinion!

To join the conversation, and become an exclusive member of Machine Design, create an account today!