Original Publish Date : 5/6/2008
Will Hybrids Heat Up the Grid?
The growing number of plug-in hybrid electric cars and trucks may or may not require new electrical plants in the U.S., depending on when they’re charged.

A recent Oak Ridge National Laboratory (ORNL) study looked at how the expected increase in electric cars and trucks will affect the power grid.

“Some assessments of electric vehicles assume owners will charge them only at night,” says Stan Hadley of ORNL’s Cooling, Heating and Power Technologies Program. “But consumers will want to plug in when it’s convenient, not when utilities prefer. The utilities will need to create incentives.” Socalled “smart” chargers that know the price of power, demands on the system, and when the car will be needed could help owners and utilities.

ORNL researchers based the study on their own predictions of electricity demand, supply, infrastructure, prices, and emission levels. They assumed electric hybrids would command a 25% market share by 2020. Scenarios were run for 2020 and 2030 with charging times of 5 and 10 p.m., in addition to other variables.

The need for added generation might be more critical in 2030, when hybrids will make up a larger proportion of automobiles. In the worst-case scenario — if all hybrid owners charge their vehicles at 5 p.m. and use 6 kW of power — up to 160 large power plants would be needed nationwide to meet the demand. The increased demand would also reduce reserve power margins in particular regions.

The best-case scenario occurs if vehicles are plugged in after 10 p.m. Based on demand projections, anywhere from zero to eight additional power plants might be needed.

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
NI Lithium-Ion Battery Measurement
Today's current and future electric vehicles rely on high-power batteries to store the massive amounts of electricity needed to drive many miles on a single charge. These batteries are composed of hundreds or even thousands of individual cells stacked together at voltages over 300V. When designing and building a high voltage battery pack, engineers need to be able to test and measure the individual...
Miniature Machine Tools
Prof. Ozdoganlar’s research focuses on processes and equipment for micro-manufacturing. Research projects at Carnegie Mellon's Department of Mechanical Engineering include experimental, theoretical, and numerical (simulation) studies. The processes of interest include mechanical micromachining process, where micro-scale milling, drilling, and grinding tools as small as 10 µm in diameter are...
ADI's RF Demo: Sensors Expo 2008
Analog Devices' RF technology simplifies wireless networking in industrial settings
ADI's Sigma Delta ADC Demo: Sensors Expo 2008
There are many uses for Analog Devices' family of Sigma Delta ADCs. This demo shows how an ADI Sigma Delta ADC can be configured for pressure sensing and weighscale applications
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
raw material selection
Recently I checked the mechanical strength of raw material (En 9 , BS 970)used for a threaded stud. Requirements(specs.) are as follows: UTS(mini.)67 KG/SQ.MM,%ELONGATION...

Mass-Transit Myths
When you say The Europeans and people in the Far East are eating our lunch because they see the future. You mean, like, the fact that in China the number...

physics of holding a gun sideways
Strictly from an accuracy standpoint-------hand guns are typically is "sighted in" in a vertial positon & they allow for some recoil that will cause...

One Less Conspiracy
Readers of a certain age will probably recall hearing tales of a supposed conspiracy among oil companies and automakers. The way this old wives’...

Kids Like Technology. Now Work on the Parents
I learned something right off the bat on a recent trip to a local high school: I should have brought a lot more engineering magazines. They...