Original Publish Date : 4/7/2008
Leland Teschler's Editorial: How Not to Make Engineering Appeal to Kids
Programs that introduce engineering to school children make headlines today.

Project Lead the Way, Childhood Design & Engineering, and other efforts are noble attempts to show youngsters what engineering can be like.

I have some advice for people trying to give kids the idea that engineering can be cool: Remember that your audience is naive about most things technical. This chestnut of wisdom is based on my own experience attending a similar program by the Society of Automotive Engineers. Back in the 1960s, the SAE invited my science class to visit a company supplying manufacturing equipment to automakers.

The organizers certainly had the best of intentions. But you need to understand what that visit was like from the viewpoint of a junior-high schooler. Picture in your mind TV’s South Park kids turned loose in a factory. That day, we were just as clueless as those cartoon characters.

My dimming recollection of the trip is one of being bored to tears with most of it. We started with an introduction from a high-level manager who tried to explain what the plant did. He lost all of us completely after two sentences. What followed was the slowest half hour of my short life as he droned on oblivious to his listeners all looking down at their shoes.

Next came a tour of the factory. The guy who to ok us through talked a lot. None of it made any sense to us. The only real knowledge we came away with was that factories are dark, grimy places full of machinery and noise.

Finally we visited with what I thought were a bunch of engineers. I didn’t figure out who they really were until I was in my own career: These were draftsmen. For years after that, I thought engineers spent most of their time at drafting boards.

I am not sure we ever really met a practicing engineer that morning. But there wouldn’t have been much to see —little more than someone at a desk with a few open catalogs and a slide rule.

Things picked up a bit after we left the factory to go downtown where we sat in on an SAE function. One of the speakers was the recipient of SAE’s Outstanding Young Engineer Award, an honor the organization still gives out today. None of my group got much out of what he said. But he was the youngest person we’d seen that day in a suit, and the only one we’d seen with a beard.

At least to my young mind, he made a good impression, even if I couldn’t understand what he was saying. I wished we could have spent more time listening to him instead of to the mind-numbing presentations we’d gotten.

Thankfully, most programs introducing kids to technology today use a lot more creativity than the modest endeavors of four decades ago. And they build in more time with people like SAE’s Outstanding Young Engineer. In my case, it would be accurate to say I pursued an engineering career despite the SAE’s inadvertent attempt to convince me it was a boring field.

— Leland Teschler

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
NI Lithium-Ion Battery Measurement
Today's current and future electric vehicles rely on high-power batteries to store the massive amounts of electricity needed to drive many miles on a single charge. These batteries are composed of hundreds or even thousands of individual cells stacked together at voltages over 300V. When designing and building a high voltage battery pack, engineers need to be able to test and measure the individual...
Miniature Machine Tools
Prof. Ozdoganlar’s research focuses on processes and equipment for micro-manufacturing. Research projects at Carnegie Mellon's Department of Mechanical Engineering include experimental, theoretical, and numerical (simulation) studies. The processes of interest include mechanical micromachining process, where micro-scale milling, drilling, and grinding tools as small as 10 µm in diameter are...
ADI's RF Demo: Sensors Expo 2008
Analog Devices' RF technology simplifies wireless networking in industrial settings
ADI's Sigma Delta ADC Demo: Sensors Expo 2008
There are many uses for Analog Devices' family of Sigma Delta ADCs. This demo shows how an ADI Sigma Delta ADC can be configured for pressure sensing and weighscale applications
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
raw material selection
Recently I checked the mechanical strength of raw material (En 9 , BS 970)used for a threaded stud. Requirements(specs.) are as follows: UTS(mini.)67 KG/SQ.MM,%ELONGATION...

Mass-Transit Myths
When you say The Europeans and people in the Far East are eating our lunch because they see the future. You mean, like, the fact that in China the number...

physics of holding a gun sideways
Strictly from an accuracy standpoint-------hand guns are typically is "sighted in" in a vertial positon & they allow for some recoil that will cause...

One Less Conspiracy
Readers of a certain age will probably recall hearing tales of a supposed conspiracy among oil companies and automakers. The way this old wives’...

Kids Like Technology. Now Work on the Parents
I learned something right off the bat on a recent trip to a local high school: I should have brought a lot more engineering magazines. They...