Original Publish Date : 4/7/2008
Carbon Nanotubes Outperform Copper Nanowires as Interconnects
Researchers at Rensselaer Polytechnic Institute have created a road map that brings academia and the semiconductor industry one step closer to realizing carbon nanotube interconnects, and alleviating the current bottleneck of information flow that is limiting the potential of computer chips in everything from personal computers to portable music players.

Newswise — Researchers at Rensselaer Polytechnic Institute have created a road map that brings academia and the semiconductor industry one step closer to realizing carbon nanotube interconnects, and alleviating the current bottleneck of information flow that is limiting the potential of computer chips in everything from personal computers to portable music players.
To better understand and more precisely measure the key characteristics of both copper nanowires and carbon nanotube bundles, the researchers used advanced quantum-mechanical computer modeling to run vast simulations on a high-powered supercomputer. It is the first such study to examine copper nanowire using quantum mechanics rather than empirical laws.
After crunching numbers for months with the help of Rensselaer’s Computational Center for Nanotechnology Innovations, the most powerful university-based supercomputer in the world, the research team concluded that the carbon nanotube bundles boasted a much smaller electrical resistance than the copper nanowires. This lower resistance suggests carbon nanotube bundles would therefore be better suited for interconnect applications.
“With this study, we have provided a road map for accurately comparing the performance of copper wire and carbon nanotube wire,” said Saroj Nayak, an associate professor in Rensselaer’s Department of Department of Physics, Applied Physics, and Astronomy, who led the research team. “Given the data we collected, we believe that carbon nanotubes at 45 nanometers will outperform copper nanowire.”
The research results will be featured in the March issue of Journal of Physics: Condensed Matter.
Because of the nanoscale size of interconnects, they are subject to quantum phenomena that are not apparent and not visible at the macroscale, Nayak said. Empirical and semi-classical laws cannot account for such phenomena that take place on the atomic and subatomic level, and, as a result, models and simulations based on those models cannot be used to accurately predict the behavior and performance of copper nanowire. Using quantum mechanics, which deals with physics at the atomic level, is more difficult but allows for a fuller, more accurate model.
“If you go to the nanoscale, objects do not behave as they do at the macroscale,” Nayak said. “Looking forward to the future of computers, it is essential that we solve problems with quantum mechanics to obtain the most complete, reliable data possible.”
The size of computer chips has shrunk dramatically over the past decade, but has recently hit a bottleneck, Nayak said. Interconnects, the tiny copper wires that transport electricity and information around the chip and to other chips, have also shrunk. As interconnects get smaller, the copper’s resistance increases and its ability to conduct electricity degrades. This means fewer electrons are able to pass through the copper successfully, and any lingering electrons are expressed as heat. This heat can have negative effects on both a computer chip’s speed and performance.
Researchers in both industry and academia are looking for alternative materials to replace copper as interconnects. Carbon nanotube bundles are a popular possible successor to copper, Nayak said, because of the material’s excellent conductivity and mechanical integrity. It is generally accepted that a quality replacement for copper must be discovered and perfected in the next five to 10 years in order to further perpetuate Moore’s Law – an industry mantra that states the number of transistors on a computer chip, and thus the chip’s speed, should double every 18-24 months.
Nayak said there are still many challenges to overcome before mass-produced carbon nanotube interconnects can be realized. There are still issues concerning the cost of efficiency of creating bulk carbon nanotubes, and growing nanotubes that are solely metallic rather than their current state being of partially metallic and partially semiconductor. More study will also be required, he said, to model and simulate the effects of imperfections in carbon nanotubes on the electrical resistance, contact resistance, capacitance, and other vital characteristics of a nanotube interconnect.
Rensselaer graduate student Yu Zhou and postdoctoral research assistant Subbalakshmi Sreekala are co-authors of the paper. Materials science and engineering professor Pulickel Ajayan, who is now at Rice University, is also a co-author.
Funding for this project was provided by the New York State Interconnect Focus Center.
About Rensselaer
Rensselaer Polytechnic Institute, founded in 1824, is the nation’s oldest technological university. The university offers bachelor’s, master’s, and doctoral degrees in engineering, the sciences, information technology, architecture, management, and the humanities and social sciences. Institute programs serve undergraduates, graduate students, and working professionals around the world. Rensselaer faculty are known for pre-eminence in research conducted in a wide range of fields, with particular emphasis in biotechnology, nanotechnology, information technology, and the media arts and technology. The Institute is well known for its success in the transfer of technology from the laboratory to the marketplace so that new discoveries and inventions benefit human life, protect the environment, and strengthen economic development.
http://www.newswise.com/p/articles/view/538635/

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Inkjet Material Deposition System
The MDS 300 is an ultra high precision Materials Depostion System. It enables digital deposition of a wide range of fluids utilizing inkjet printhead technology. The MDS 300 allows the ultimate flexibility in printing capabilities. Users can input print resolution, print speed, printhead separation and curing processes. It can be utilized in both R&D and pilot line production applications....
Printed Solar Power
Plextronics, Inc. is an international technology company that specializes in printed solar, lighting and other electronics. Headquartered in Pittsburgh, PA, the company's focus is on organic solar cell and OLED (Organic Light Emitting Diode) lighting, specifically the conductive inks and process technologies that enable those and other similar applications. In printed solar cells, sunlight is...
Genesys Programmable Power Supply
Lambda's Genesys family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 600V and current up to 1,000A. This member of the Lambda Genesys product family of programmable switching...
TerraMax Autonomous Cargo Truck
The TerraMax autonomous truck is based on Oshkosh’s Medium Tactical Vehicle Replacement (MTVR) defense truck platform. Most recently, TerraMax competed in the 2007 Darpa Urban Challenge. The MTVR was designed for the US Marine Corps with a 70% off-road mission profile. TerraMax's unmanned ground vehicle kit does not interfere with the conventional operation of the vehicle. A robust sensor suite...
V-Bat VTOL UAV
MLB Company's next generation UAV is the V-Bat, a tail-sitter VTOL craft that can take off and land vertically, eliminating the need for a runway or catapult, as well as hover autonomously. For autonomous waypoint navigation, it can transition smoothly to the horizontal for speeds up to 100 mph. MLB Company has been involved in a wide variety of projects, ranging from the 15’ wingspan Volcano...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Mass-Transit Myths
It should be noted, Hong Kong = very high population density, very high job density. So not a surprise that mass transit is very convenient there.

What’s Tough About Training
This issue’s emphasis on motion control prompts some reflection on how people learn about motion technology. Often theoretical training isn’t...

What’s hot? Not ethanol
This special issue looks at some of the technologies and industrial themes that are eliciting a lot of interest in the technical community. But...

We Don’t Know How to Recreate Silicon Valley
Preseason football is on TV, the kids are getting ready for the school year, and theme parks are anticipating their final Labor Day crowds. It...

Hydraulic Pump design
Where can i find a person that can design hydraulic pumps? immediatly Terra 503-612-2040