Original Publish Date : 2/19/2008
New Product: Conveyors Go High Speed
The DynaCon modular high-speed conveyor uses a variable-speed, energy- efficient, 115-V motor that lets conveyors from 4 to 72-in. wide operate at speeds from 20 to 200 fpm.
The unit’s modular design gives it the ability to change the length in increments as short as 6.5 in.

Dynamic Conveyor Corp.,
5980 Grand Haven Rd., Muskegon, MI 49441,
(800) 640-6850,
dynamicconveyor.com

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
LG90 HGTV 1,000,000:1 Contrast Ratio
The LG90 provides for the ultra-high 1,000,000:1 high contrast and LEDs that provide whiter whites and richer blacks with the added benefit of increased energy efficiency. LED backlighting also results in more natural color representation and faster response time for smoother, more natural picture motion. LG's Intelligent Sensor provides automatic image quality optimization of brightness and...
Crestron TPS-6X Touchpanel
Designed for speed, style and extreme versatility, the TPS-6X is a 6-inch touchpanel that streamlines the Crestron family of panels, combining the features and functionality previously found in nine other models. The Crestron TPS-6X redefines touchpanel design, providing both a sleek tabletop form factor while also offering total portability. While docked, the TPS-6X is a wired Cresnet or Ethernet...
The NEESWood Project
The Network for Earthquake Engineering and Simulation in mid-rise wood frame construction (NEESWood) consists of a group of 15 shared use equipment sites to study seismic activity and building methods. Funded by the National Science Foundation, NEESWood’s goal is to safely increase the height of wood frame construction buildings to six stories while effectively incorporating technology that minimizes...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
What’s Tough About Training
I have taught many Mechanial and Electrical Apprentices at a local company the basics and Trouble Shooting skills fr Fluid Power equipment. The classes...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...

Rolled cylinder
that's pretty close tolerance for such a large item. Can you perhaps control the positon of the OD of the drum- mount the drum on rollers- and let the...