Original Publish Date : 1/10/2008
Backtalk - 01/10/2008
Searching for speed traps worldwide

Drivers around the world can pinpoint and review speed traps located anywhere on the planet, thanks to Njection.com. The Portland, Oreg.- based Speed Trap (http://njection.com/speedtrap, Njection.com ) is a mashup (Web application hybrid) that uses Microsoft Live Maps to pinpoint and review speed traps. Members share information in a database that can be viewed by anyone. In addition to the location of the trap, members can post detailed information such as the type of speed detection used, posted speed limit, and level of enforcement.

Njection.com also includes a Forums section in which bloggers/ technical contributors (those with an aptitude about cars) can write about current technical issues, a Download section that lets users upload and download Engine Control Unit (ECU) maps or other technical specifications, and a photo section with over 5 Gbytes of high-resolution photos for anyone to browse and download.

Miniature engineering masterpieces

Austria’s Minimundus park, which opened in 1958, has grown to display over 150 models of the most beautiful buildings in the world. The park sits on 26,000 m2 and also features specialized landscapes, f loral displays, and a tropical rain forest.

The realistic-looking models are created down to the smallest detail and, where feasible, with original materials, such as marble, sandstone, basalt, and tuff. The company also uses 3D “walk-throughs” of model interiors, audio guides, original sound documentation, or background music typical to a particular country.

There are many moving models, such as the space shuttle which blasts off every hour/ Check out the minimundus site at www.minimundus.at/englisch/frame_ueber_uns.htm.

Click on any of the images below for a full-size view :

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
DARwIn IIIx Soccer Playing Robot
DARwIn is a fully autonomous humanoid robot capable of bipedal walking and performing human like motions. Developed at the Robotics & Mechanisms Laboratory (RoMeLa) at Virginia Tech, DARwIn is a research platform for studying robot locomotion and autonomous behaviors, and also the base platform for Virginia Tech’s entry to the RoboCup competition. DARwIn IIIx, the latest in the DARwIn series...
Cine-Digitar 1.33x Anamorphic Lens
Home cinema has finally caught up to Hollywood, and Schneider Optics makes it possible. The Cine-Digitar Anamorphic 1.33x Lens System enables 16:9 digital projectors to fill the entire height and width of 2.35:1 format screens with cinema-quality images, eliminating the letterbox black bars that typically frame the image when a 16:9 projector with a conventional lens projects a Cinemascope movie....
Seismic Protection System
While woodframe structures have historically performed well with regard to life safety in regions of moderate to high seismicity, these types of low-rise structures have sustained significant structural and non-structural damage in recent earthquakes. This NEESWood project, funded by the National Science Foundation, seeks to take on the challenge of developing a seismic design philosophy that will...
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
What’s Tough About Training
Very good. So vo/tech students are still getting hands on apprenticing. What about 4yr B.S. engineering students? Anybody still do that?

The effects of economic turmoil?
The news is full of market uncertainty, tight credit, and falling interest rates. Has the economic turmoil affected your work? Are you taking even more...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...