Original Publish Date : 1/10/2008
Letters - 01/10/2008
Working people need working vehicles

I agree with every thing in the editorial you wrote (“MPG Follies, Nov. 20). But you didn’t go far enough. I wish you would write an article on how SUVs and pickup trucks are used and the safety implications of continuingly building lighter and lighter cars and trucks that are expected to do the job.

Take my case, for example. My wife has a 2003 GMC Envoy with a trailer-towing package and heavy-duty suspension. I have a 2004 Chevy Silverado 1500, with a trailer towing package, limited slip, and a 373 rear end. My wife is 4 miles from work, and I am 6 miles from work. We put less than 10,000 miles on these vehicles a year, but we use them for a variety of purposes.

They must have room to carry my wife and I, along with our grandkids. We have a small ranch, so both trucks are also expected to haul and tow. At times I am pulling 13,300 lb with my truck and stock trailer. A -ton truck would do some of these jobs better but gas mileage would be 13 mpg without any load. (Both our trucks get 22 mpg on interstates with light loads.)

If fuel-mileage standards for SUVs and light trucks are increased to proposed levels, these vehicles will be lucky to pull themselves. The bigger problem, and a safety issue, is that medium-sized loads will push the towing vehicle all over the place while braking. Simple physics. My question is, what kind of vehicle are they going to leave us with?

Bob Lunnon

Bob, thanks for writing. I grew up on a dairy farm and we always drove trucks for the same reasons you mention. In my opinion, the people pushing for high mpg ratings are blind to the realities of those who have lifestyles that do not consist entirely of commuting to an office job in some kind of urban setting.

Lee Teschler

Union bashing?

I read your editorial (“Don’t hold your breath waiting for U.S. automakers to thrive,” Oct. 25). I think there’s enough greed on both sides of the table, from the UAW and management, to go around, don’t you? I’d appreciate you mentioning that in an article, even though it might cost you some ad money. At least be unbiased.

David Gayle

As I said in the editorial, both UAW and Big Three management can be accused of being unrealistic about the costs associated with the vehicles they make.

Lee Teschler

But you didn’t say it very loudly Mr. Teschler. The whole article is definitely biased against the UAW. I would have thought that a more balanced article about wage and benefits balanced against corporate profits would have been more appropriate. Instead we get the remark “ too many UAW members sleeping on the job”.

David Gayle

That was a comment made to me. I merely reported it. If the editorial sounded biased, it was because it reflected the comments I heard at National Manufacturing Week regarding the strike. I did not hear any pro-UAW comments there.

Lee Teschler

Best foot forward

I read your editorial about the unfriendly face some companies put on their factories (“What is a factory?” Nov. 8), and I thought you might be interested in how Toyota appears to its community here in Georgetown, Ky. Toyota built a visitor center with displays showing how its vehicles work. Three times a day (four times on Thursdays), visitors may take a tour of the factory which is conducted in motorized trains. The tours are often booked days in advance. On the tour, visitors not only get to see how cars are put together, but also learn about the Toyota’s corporate philosophy. I took the tour and came away with a positive view of the company and its interaction with the community.

Larry Smith

Fording the Fjords

Just got done reading the review on the new H3 Hummer. It said that this vehicle “.....will ford (sic) 16 in.. of water at 20 mph....”. Although “ford” is a correct use of this word, I’m used to seeing it spelled as fjord. I was also somewhat surprised at the H3’s small engine and, thus, low tow ratings. I always thought these things were beasts. From your review, folks obviously will not buy them to tow any kind of sizable boat or other type trailer. Gas mileage stinks, too.

Gary Vignos

In fact, fjord and fiord are nouns describing deep, and narrow waterways; ford is the verb meaning to cross a body of water.

— Editor

Gadget guesses gone wrong

It appears to me to be the first design of an automatic tennis-ball throwing machine. I believe this gadget is a propane- powered heater, commonly referred to as a turboheater these days, used in garages and semi-enclosed construction projects during the winter.

Eric

Looks like an early snowmaker.

Paul

An acetylene-powered sonic cannon for avalanche control.

Doug

It launches T-shirts or similar soft goods into the stands at football games.

Richard

A confetti cannon.

Gary

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Cine-Digitar 1.33x Anamorphic Lens
Home cinema has finally caught up to Hollywood, and Schneider Optics makes it possible. The Cine-Digitar Anamorphic 1.33x Lens System enables 16:9 digital projectors to fill the entire height and width of 2.35:1 format screens with cinema-quality images, eliminating the letterbox black bars that typically frame the image when a 16:9 projector with a conventional lens projects a Cinemascope movie....
Seismic Protection System
While woodframe structures have historically performed well with regard to life safety in regions of moderate to high seismicity, these types of low-rise structures have sustained significant structural and non-structural damage in recent earthquakes. This NEESWood project, funded by the National Science Foundation, seeks to take on the challenge of developing a seismic design philosophy that will...
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
LG90 HGTV 1,000,000:1 Contrast Ratio
The LG90 provides for the ultra-high 1,000,000:1 high contrast and LEDs that provide whiter whites and richer blacks with the added benefit of increased energy efficiency. LED backlighting also results in more natural color representation and faster response time for smoother, more natural picture motion. LG's Intelligent Sensor provides automatic image quality optimization of brightness and...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
The effects of economic turmoil?
The news is full of market uncertainty, tight credit, and falling interest rates. Has the economic turmoil affected your work? Are you taking even more...

What’s Tough About Training
I have taught many Mechanial and Electrical Apprentices at a local company the basics and Trouble Shooting skills fr Fluid Power equipment. The classes...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...