Original Publish Date : 5/6/2008
Will Hybrids Heat Up the Grid?
The growing number of plug-in hybrid electric cars and trucks may or may not require new electrical plants in the U.S., depending on when they’re charged.

A recent Oak Ridge National Laboratory (ORNL) study looked at how the expected increase in electric cars and trucks will affect the power grid.

“Some assessments of electric vehicles assume owners will charge them only at night,” says Stan Hadley of ORNL’s Cooling, Heating and Power Technologies Program. “But consumers will want to plug in when it’s convenient, not when utilities prefer. The utilities will need to create incentives.” Socalled “smart” chargers that know the price of power, demands on the system, and when the car will be needed could help owners and utilities.

ORNL researchers based the study on their own predictions of electricity demand, supply, infrastructure, prices, and emission levels. They assumed electric hybrids would command a 25% market share by 2020. Scenarios were run for 2020 and 2030 with charging times of 5 and 10 p.m., in addition to other variables.

The need for added generation might be more critical in 2030, when hybrids will make up a larger proportion of automobiles. In the worst-case scenario — if all hybrid owners charge their vehicles at 5 p.m. and use 6 kW of power — up to 160 large power plants would be needed nationwide to meet the demand. The increased demand would also reduce reserve power margins in particular regions.

The best-case scenario occurs if vehicles are plugged in after 10 p.m. Based on demand projections, anywhere from zero to eight additional power plants might be needed.

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
DARwIn IIIx Soccer Playing Robot
DARwIn is a fully autonomous humanoid robot capable of bipedal walking and performing human like motions. Developed at the Robotics & Mechanisms Laboratory (RoMeLa) at Virginia Tech, DARwIn is a research platform for studying robot locomotion and autonomous behaviors, and also the base platform for Virginia Tech’s entry to the RoboCup competition. DARwIn IIIx, the latest in the DARwIn series...
Cine-Digitar 1.33x Anamorphic Lens
Home cinema has finally caught up to Hollywood, and Schneider Optics makes it possible. The Cine-Digitar Anamorphic 1.33x Lens System enables 16:9 digital projectors to fill the entire height and width of 2.35:1 format screens with cinema-quality images, eliminating the letterbox black bars that typically frame the image when a 16:9 projector with a conventional lens projects a Cinemascope movie....
Seismic Protection System
While woodframe structures have historically performed well with regard to life safety in regions of moderate to high seismicity, these types of low-rise structures have sustained significant structural and non-structural damage in recent earthquakes. This NEESWood project, funded by the National Science Foundation, seeks to take on the challenge of developing a seismic design philosophy that will...
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
What’s Tough About Training
Very good. So vo/tech students are still getting hands on apprenticing. What about 4yr B.S. engineering students? Anybody still do that?

The effects of economic turmoil?
The news is full of market uncertainty, tight credit, and falling interest rates. Has the economic turmoil affected your work? Are you taking even more...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...