Original Publish Date : 5/6/2008
Assault and Batteries
Researchers at Sandia National Laboratories must hate batteries: They heat them to extreme temperatures, overcharge them, drive nails into them, and generally do whatever they can to destroy them.

The torture tests are part of the DOE-funded FreedomCAR program that is testing lithium-ion batteries for hybrid electricgasoline vehicles and plug-in hybrids.

Current hybrid vehicles run on gasoline and use nickel-metal hydride batteries to store energy for the electric motor. FreedomCAR hopes to replace those batteries with lithiumion versions that have six times the energy density of lead-acid batteries and two to three times the energy density of nickel-metal hydride batteries.

“Lithium-ion batteries in laptops and power tools have greatly improved over the past few years,” says Peter Roth, lead researcher for Sandia’s FreedomCAR battery efforts. “In fact, they have improved so much that we expect to see them in hybrids later this year and possibly in short-range plug-in hybrids within two years.”

The researchers test batteries to determine when and how they can fail or leak. They also study the stability of the materials, flameretardance, high-temperature integrity of separators between the cathode and anode, and other thermophysical properties.

Roth says some of the newer batteries, like the new lithium/ iron phosphate versions in hand-held power tools, are extremely resilient and less reactive when subjected to extreme conditions. Industry experts predict that plug-ins that can run 10 miles using only electricity are two to three years away while plug-ins that can run 40 miles are three to four years away.

The first hybrids using lithiumion batteries will be on the market later this year when Mercedes- Benz launches the S400 BlueHybrid. After that, it will launch the S300 Bluetec Hybrid, a diesel car with a lithium-ion battery. General Motors plans to introduce a 40-mile plug-in hybrid electric vehicle with lithium-ion batteries in 2010.

Click on any of the images below for a full-size view :

Rate / Comment on this Article

Post a comment

PREVIOUS COMMENTS :
     
The online caption reads. "Sandia researcher Peter Roth prepares to blow up". I hope Peter survived and is well.
BY: Mike.Frain - 10/12/2008 11:49:22 AM
DARwIn IIIx Soccer Playing Robot
DARwIn is a fully autonomous humanoid robot capable of bipedal walking and performing human like motions. Developed at the Robotics & Mechanisms Laboratory (RoMeLa) at Virginia Tech, DARwIn is a research platform for studying robot locomotion and autonomous behaviors, and also the base platform for Virginia Tech’s entry to the RoboCup competition. DARwIn IIIx, the latest in the DARwIn series...
Cine-Digitar 1.33x Anamorphic Lens
Home cinema has finally caught up to Hollywood, and Schneider Optics makes it possible. The Cine-Digitar Anamorphic 1.33x Lens System enables 16:9 digital projectors to fill the entire height and width of 2.35:1 format screens with cinema-quality images, eliminating the letterbox black bars that typically frame the image when a 16:9 projector with a conventional lens projects a Cinemascope movie....
Seismic Protection System
While woodframe structures have historically performed well with regard to life safety in regions of moderate to high seismicity, these types of low-rise structures have sustained significant structural and non-structural damage in recent earthquakes. This NEESWood project, funded by the National Science Foundation, seeks to take on the challenge of developing a seismic design philosophy that will...
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
What’s Tough About Training
Very good. So vo/tech students are still getting hands on apprenticing. What about 4yr B.S. engineering students? Anybody still do that?

The effects of economic turmoil?
The news is full of market uncertainty, tight credit, and falling interest rates. Has the economic turmoil affected your work? Are you taking even more...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...