Original Publish Date : 3/17/2008
Leland Teschler's Editorial: The wrong message for Engineering Week
Last month’s Engineering Week was supposed to be a grand attempt at encouraging students to pursue careers in technical fields.

No surprise that there were a lot of E Week booster speeches about the engineering profession. The director of IBM’s worldwide research laboratories, writing in Business Week, summed up the tone of most remarks when he said, “We need greater cooperation between academia, private industry, and government to …. foster enthusiasm and skills for the sciences.”

Unfortunately there were other events taking place in February that weren’t likely to engender much enthusiasm for technical work. Perhaps the most newsworthy was when GM handed out a list of job categories in its factories which will receive 50% pay cuts under a new national labor contract. Only people directly connected to the assembly line will still get the top rate of $28 an hour. Those handling jobs such as engine dress, cockpit build and subassembly in body shops, paint mixing, and material movement will now get $14 an hour.

And despite the words of its research director, IBM did its part in putting a damper on the prospects of technical workers when on Feb. 1 it reduced the regular pay of 6% of its U.S. workforce. Roughly 7,600 workers were reclassified as nonexempt employees as a result of a legal settlement in which IBM admitted no wrong doing but agreed to pay $65 million to a group of employees who felt they were wrongly denied overtime pay. “Those jobs were already being competitively compensated based on skills and industry competition,” says an IBM spokesperson. “If we had added overtime to what we regard as competitive compensation, the compensation would have gone outside competitive rates. So we did a remix and took down the base salary.”

The salary adjustment showed up in paychecks issued in mid- February, coincidentally, just in time for the kickoff of Engineering Week on Feb. 17.

Of course, the IBM employees affected are generally not engineers. “They are mostly IT specialists,” says Lee Conrad, national coordinator for Alliance@IBM, an IBM employee organization. “They run and build networks and are IT architects. They make anywhere from $50,000 to $80,000 a year and their educational background includes some college along with technical experience.”

IBM says it has no plans to do anything similar for other job categories. “This was specifically an outgrowth of the legal case,” says the IBM spokesperson. Nevertheless, “The rumor mill within IBM is that they will extend this action to other kinds of employees,” says Conrad.

The fact that pay cuts at GM and IBM don’t directly affect engineers is of little consolation when it comes to convincing young people that technical careers are worthwhile. To youngsters, the distinction between an engineer, an IT specialist, and a factory worker is fuzzy at best. After all, these people all seem to work in similar places.

Let’s hope next year’s Engineering Week activities aren’t trumped by pay cuts and labor strife among technical workers. Otherwise E Week will be just another ineffective PR stunt with little impact on the career choices of young people.

— Leland Teschler, Editor

Rate / Comment on this Article

Post a comment

PREVIOUS COMMENTS :
     
"That was a real cool event.... besides Engineering is not just focused mainly in mechanical works but also in the application of science. I still remember when i am just a student of Bachelor of Science in Industrial Engineering, many people are asking why i took that course.... in reply to there question, they saw sadness in my eyes. I love many things to do not just in Engineering but also in technology and science. And in my big surprise, everything that a student needs in my chosen field is there, Science Application and Theories, Technology Advancement specially for machineries and the Social Function itself to help the community and solved many case inside the Productive and non-productive company. I lay my cards to finished this and now, i am not known in Engineering only but also in Technology and Science world because of what i earned in college. Mechanical Application and Science Functions in solving the problem inside the Coal-fired Power Plant is not just for Scientists but also for Engineers who know a lot in Science and Technology."-Jane Zeta K. Bond Born July 08, 1978
BY: rosyjane - 3/21/2008 3:39:05 AM
Cine-Digitar 1.33x Anamorphic Lens
Home cinema has finally caught up to Hollywood, and Schneider Optics makes it possible. The Cine-Digitar Anamorphic 1.33x Lens System enables 16:9 digital projectors to fill the entire height and width of 2.35:1 format screens with cinema-quality images, eliminating the letterbox black bars that typically frame the image when a 16:9 projector with a conventional lens projects a Cinemascope movie....
Seismic Protection System
While woodframe structures have historically performed well with regard to life safety in regions of moderate to high seismicity, these types of low-rise structures have sustained significant structural and non-structural damage in recent earthquakes. This NEESWood project, funded by the National Science Foundation, seeks to take on the challenge of developing a seismic design philosophy that will...
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
LG90 HGTV 1,000,000:1 Contrast Ratio
The LG90 provides for the ultra-high 1,000,000:1 high contrast and LEDs that provide whiter whites and richer blacks with the added benefit of increased energy efficiency. LED backlighting also results in more natural color representation and faster response time for smoother, more natural picture motion. LG's Intelligent Sensor provides automatic image quality optimization of brightness and...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
The effects of economic turmoil?
The news is full of market uncertainty, tight credit, and falling interest rates. Has the economic turmoil affected your work? Are you taking even more...

What’s Tough About Training
I have taught many Mechanial and Electrical Apprentices at a local company the basics and Trouble Shooting skills fr Fluid Power equipment. The classes...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...