Original Publish Date : 5/6/2008
Looking Back
10 YEARS AGO — MAY 7, 1998
Virtual development for aircraft: Lockheed Martin will perfect the Joint Strike Fighter and other advanced aircraft with the help of visualization software from Engineering Automation Inc.

The firm’s VisProducts, which include VisFly and a VisMockUp digital prototyping package, will help Lockheed, along with Northrop Grumman and British Aerospace, develop tactical aircraft for the U.S. Air Force, Navy, Marine Corps, and the U.K.’s Royal Navy.

30 YEARS AGO — MA Y 11, 1978
Power switch tube for fusion-test reactor: A vacuum tube designed to switch 200 kV with currents to 125 A has been developed by RCA for use in the Tokamak Fusion Test Reactor project at Princeton University. The 320-lb, 22 42-in. tube, described as the world’s most powerful, is one of 12 that will be installed. The 12 switch tubes will regulate the power for heating the fusionreaction plasma when the reactor becomes operation in1981. Computers were used to analyze the tube’s electrical characteristics and to configure the shape of the anode using FEA.

50 YEARS AGO — MA Y 1, 1958
Telescoping tail turret for the B-58 is patterned after the old collapsible metal drinking cup. The design provides a good sweep of the sky without disturbing airflow at supersonic speeds. The turret houses a sixbarrel, 20-mm version of the Civil War Gatling gun. The weapon can fire 5,000 1-lb shells/min, posing a problem in ammunition conservation. This is solved by a highly sensitive radaraiming device, above turret, which seeks out a target and fires the gun in controlled bursts. Turret and radar system were developed by Electronics and Avionics Div., Emerson Electric Co., St. Louis.

Click on any of the images below for a full-size view :

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
DARwIn IIIx Soccer Playing Robot
DARwIn is a fully autonomous humanoid robot capable of bipedal walking and performing human like motions. Developed at the Robotics & Mechanisms Laboratory (RoMeLa) at Virginia Tech, DARwIn is a research platform for studying robot locomotion and autonomous behaviors, and also the base platform for Virginia Tech’s entry to the RoboCup competition. DARwIn IIIx, the latest in the DARwIn series...
Cine-Digitar 1.33x Anamorphic Lens
Home cinema has finally caught up to Hollywood, and Schneider Optics makes it possible. The Cine-Digitar Anamorphic 1.33x Lens System enables 16:9 digital projectors to fill the entire height and width of 2.35:1 format screens with cinema-quality images, eliminating the letterbox black bars that typically frame the image when a 16:9 projector with a conventional lens projects a Cinemascope movie....
Seismic Protection System
While woodframe structures have historically performed well with regard to life safety in regions of moderate to high seismicity, these types of low-rise structures have sustained significant structural and non-structural damage in recent earthquakes. This NEESWood project, funded by the National Science Foundation, seeks to take on the challenge of developing a seismic design philosophy that will...
Friction Pendulum Sliders
At Colorado State University, Prof. John van de Lindt has applied a base isolation system to a light-frame wood building for shake-table testing. The test structure is supported on a base isolation system consisting of four sliding bearings. The bearings are friction pendulum system (FPS) bearings that isolate the building from the earthquake ground motion by allowing the building to “slide” laterally...
Earthquake Shake Table
At Colorado State University, civil engineering professor Dr. John van de Lindt conducted a series of earthquake shake table tests of a half-scale two-story residential building with an integrated one car garage as part of a National Science Foundation funded NEESWood project task related to seismic protection systems. The overall goal of that task is to enable applications of protective systems...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
What’s Tough About Training
Very good. So vo/tech students are still getting hands on apprenticing. What about 4yr B.S. engineering students? Anybody still do that?

The effects of economic turmoil?
The news is full of market uncertainty, tight credit, and falling interest rates. Has the economic turmoil affected your work? Are you taking even more...

Design Royalties
I was hired at my current position to maintain our machines. Outside of my general job duties I have built a new machine (with company funding) to...

Trustworthy engineer needed
Friends of mine have invented a clever, modular emergency shelter. They need a trustworthy engineer to make a 3D model of to make a prototype....

Dog clutch manufacturers
Can anyone recommend a reliable supplier for a part like the one shown here or on page 57 of Machine Design's Sept. 25 issue? Any suggestions greatly...