Original Publish Date : 5/6/2008
Will Hybrids Heat Up the Grid?
The growing number of plug-in hybrid electric cars and trucks may or may not require new electrical plants in the U.S., depending on when they’re charged.

A recent Oak Ridge National Laboratory (ORNL) study looked at how the expected increase in electric cars and trucks will affect the power grid.

“Some assessments of electric vehicles assume owners will charge them only at night,” says Stan Hadley of ORNL’s Cooling, Heating and Power Technologies Program. “But consumers will want to plug in when it’s convenient, not when utilities prefer. The utilities will need to create incentives.” Socalled “smart” chargers that know the price of power, demands on the system, and when the car will be needed could help owners and utilities.

ORNL researchers based the study on their own predictions of electricity demand, supply, infrastructure, prices, and emission levels. They assumed electric hybrids would command a 25% market share by 2020. Scenarios were run for 2020 and 2030 with charging times of 5 and 10 p.m., in addition to other variables.

The need for added generation might be more critical in 2030, when hybrids will make up a larger proportion of automobiles. In the worst-case scenario — if all hybrid owners charge their vehicles at 5 p.m. and use 6 kW of power — up to 160 large power plants would be needed nationwide to meet the demand. The increased demand would also reduce reserve power margins in particular regions.

The best-case scenario occurs if vehicles are plugged in after 10 p.m. Based on demand projections, anywhere from zero to eight additional power plants might be needed.

Rate / Comment on this Article

Post a comment

Be the first to comment on this article

Login to post a comment
Jamison RFID Portals
Jamison's Industrial Portals Division produces heavy-duty RFID portals that are custom designed enclosures that help track products during the manufacturing process and throughout the entire supply chain. Industrial Portals design allows users to easily install and integrate any RFID hardware/software systems with dramatically lower costs than other systems.
Higgs-3 Integrated Circuit
The Alien Technology Higgs is a family of highly integrated single chip UHF RFID Tag ICs. The chips conform to the EPCglobal Class 1 Gen 2 specifications and provide state-of-the-art performance for a broad range of UHF RFID tagging applications. Higgs-3 builds on that performance foundation by offering enhanced authentication and security capabilities along with extended memory and EPC number features....
Alien Technology RFID
As RFID expands into more applications, the simple knowledge that a given tag was seen at a certain read point is sometimes inadequate. For some applications we’d like to know more. Was the tag moving or stationary? Which direction? How fast? How far away? Alien Technology's new Intelligent Tag Radar (ITR) provides this and other information about the tag. This capability enables the RFID...
New Analog to Digital Converter Technology
From the labs at Analog Devices comes a new technology in analog to digital converter technology that is the culmination of three years work. In this episode, Bill Scofield, Design Group Leader, explains the new continuous time sigma delta converter that uses an internal loop filter with no switch capacitor sampler section.
RFID "Sniffer" Architecture
As RFID adoption continues to grow, engineers are faced with an increasing need to validate tags both for interoperability with products from other vendors and for conformance with the specified protocol. The "sniffer" RFID tag test system uses a vector signal analyzer to “sniff” the air interface between an interrogator and a tag. This system uses a reference “gold” reader or RFID simulator...
The blame game
I feel there was a glaring omission in Mr. Berke's May 25, 2006 column titled "For lack of a guard, a severed hand" — personal responsibility.
Shake, rattle, and modal analysis
FEA can be a useful tool for sizing up resonance problems.
Biomimetics could hold a key to next-generation body armor
Who would have thought that your wife's jewelry holds the secret to better body armor?
What's a mechatronics technician?
When Keith Campbell muses about industrial education, his thoughts go back to his uncle Ralph.
The meaning of bearing life
How long will a bearing last? Standardized life equations help to answer.
Engineering an ad
How do you convince a doubting public your truck is tough? You show them.
Tricked-Out Trucks
Stylists and engineers are exploring new ways to personalize pickup trucks, the best-selling type of vehicle in the U.S.
Tom-Thumb turbines power radio-controlled jets
Engineers have managed to shrink the modern jet engine until it is small enough to fit in model planes.
Engineering in India
Here’s a snapshot of the Indian engineers who increasingly compete for global manufacturing work.
Gulliver's Engines
Shrinking full-scale engines to pocket size is no small feat.
PRODUCT SEARCH
Powered by
SEARCH THE PLASTICS WEB™
Powered by
FORUMS
Where are the Lighting/lamp engineers and designers?
Are you looking for some Industrial deisgners? We have got good experience in designing lamps using latest LED technology. You can contact me if you haven't...

Making metallic objects when only a physical part is available
Hi Leslie: If the object is small, I wonder if the dental industry might suggest a solution.  I worked as a dental tech and we used the icky polymer...

Trustworthy engineer needed
Hi,Did you find the resource? 

Lead shot making
I have been using liquid laundry detergent as a coolant and having grate success. The one I use is the cheapest that can be found and it is from the dollar...

Need Mech. Designer as a equal partner
We are the NOVA group and we’re a start-up company in the New York area. We will be producing parts for the auto industry We are looking for a Mech. Designer...